Home elevator is designed for personal home use, it has features like UPS backup power, progressive safety gear, overload protection, over voltage protection, emergency descent valve, proportional valve, light curtain, low noise, etc. The enclosure consists of stainless steel, aluminum alloy frame and tempered glass, forming solid structure.

1. How big is the custom lift car?
We are custom-made products without standard size. We will tailor them to you completely according to your reserved opening plan. In short, we will provide you with lift equipment of corresponding size according to the size of your opening. However, it is recommended that the car size should not exceed 1 * 1.2m.

2. What is the load of the custom home lift?
The rated load is 400 kg

3. Do I need to make steel structure to fix the custom home lift?
No, hydraulic lifts can be installed without well. There are many fixing methods, such as wall, ground, floor and ceiling. You can also send us the photos of the site. After seeing the site, we will give you a plan to see whether it needs to be reinforced with steel structure.

4. Can I install the custom home lift outdoors?
Yes, we can customize professional aluminum alloy frame and toughened glass shield. It's no problem to install it outdoors.

5.Elevator lifts has the main characteristics :
1.Usual motor or silent motor
2.Digital display button
3.Anti-drop platform
4.Automatic ramp
5.UPS battery charge for power-cut
6.With cabin or not,push door or fold door.
7.Anti-drop device.

6.The safety measures for Commercial lift elevator are as follows:
1. Fall loss protection function, when the elevator suddenly decreases, the safety gear can firmly secure

 the elevator on the guide, so that the elevator car displacement does not exceed two centimeters
2. Touching bottom sensor, when an obstacle is encountered during the decline in the car,

 the car can stop running immediately 
3. The trip switch, our elevator has three limited switches to prevent elevator 
4. Electromagnetic lock function, when the elevator is running, the door is not opened, and when the elevator 

does not reach the destination floor, the landing door will not be opened. 
5.UPS backup power, when power failure, it will make the cabin to get to the ground. 
6. Silent pump station, it is quiet during lifting and lowering.

7.best home  elevator and its cost
Hydraulic elevator is a customized product according to your building size. It is mainly made up of cabin part, cylinder part and T-rail part. The smallest size we need is 1000x700mm or 3.3x2.3ft. And the biggest size is 1500x1500mm or 4.9x4.9ft. If you have a much bigger size, we can add extra assist guide rail to make a bigger hydraulic elevator. Usually, the standard cabin size is 1200x1000mm or 3.9x3.3ft, and this will need about 1400x1450mm or 4.6x4.75ft space size for installation. We will provide you professional installation guide and video, so you don’t need to worry about how to install